Theoretical and experimental investigation of optically driven nanoelectromechanical oscillators

Ilic, B.; Krylov, S.; Craighead, H. G.

doi:doi:10.1063/1.3305464

Volume/Page
Keyword
DOI
Citation
Advanced

Volume: Page/Article:

Search Content Type

article doi:

Citation:

Enhanced ultraviolet electroluminescence from ZnO nanowires in TiO₂/ZnO coaxial nanowires/poly(3,4-ethylenedioxythiophene)-poly(styrene-sulfonate) heterojunction

The ultraviolet (UV) electroluminescence (EL) from the TiO2/ZnO coaxial nanowires (NWs)/poly(3,4-ethylenedioxythiophene)-poly(styrene-sulfonate) inorganic/organic heterostructure devices is greatly enhanced and the defect emission is significantly suppressed compared with the uncoated ZnO NW device at room temperature. The origins of the great changes in EL of ZnO NW devices are attributed to the surface modification of the sputtered TiO2 coating and the reduction in the pinhole traps on the su...

First-principles study of alkali-atom doping in a series of zigzag and armchair carbon nanotubes

First-principles calculations are performed to study the Li doping in a series of carbon nanotubes with different diameters and chiralities. It is found that the Li–Li interaction inside or outside zigzag tubes is repulsive but strongly screened. Moreover, small diameter zigzag tubes are energetically more favorable than larger ones for Li doping. In contrast, almost all the armchair tubes have the same Li binding energy, especially for the outside doping. Our theoretical results suggest that s...

The actuation of biologically functional micro- and nanomechanical structures using optical excitation is an emerging arena of research that couples the fields of optics, fluidics, electronics, and mechanics with potential for generating novel chemical and biological sensors. In our work, we fabricated nanomechanical structures from 200 and 250 nm thick silicon nitride and single crystal silicon layers with varying lengths and widths ranging from 4 to 12 μm and 200 nm to 1 μm, respectively. Using a modulated laser beam focused onto the device layer in close proximity to the clamped end of a cantilever beam, we concentrate and guide the impinging thermal energy along the device layer. Cantilever beams coupled to chains of thermally isolated links were used to experimentally investigate energy transport mechanisms in nanostructures. The nature of the excitation was studied through steady-periodic axisymmetric thermal analysis by considering a multilayered structure heated using a modulated laser source. Results were verified by finite element analysis, which was additionally implemented for the solution of steady-periodic and transient thermal, as well as steady thermoelastic problems. These theoretical investigations, coupled with our experimental results, reveal that the complex dynamics underpinning optical excitation mechanisms consists of two disparate spatial regimes. When the excitation source is focused in close proximity to the structure the response is primarily thermal. We show that as the source is placed farther from the clamped end of the structure, the thermal response progressively fades out, indicating the possibility of mechanical wave propagation. Understanding the excitation mechanisms may be useful for applications including compact integration of nanophotonic elements with functionalized nanomechanical sensors for ultrasensitive biochemical analysis.

Article Outline

INTRODUCTION
RESULTS AND DISCUSSION
1. Thermal problem–analytical solution
2. Thermal problem–numerical solution
3. Thermoelastic problem
4. Optical actuation
CONCLUSIONS

RELATED DATABASES

To view database links for this article, you need to log in.

KEYWORDS and PACS

Keywords

beams (structures), cantilevers, elemental semiconductors, finite element analysis, multilayers, nanoelectromechanical devices, oscillators, silicon, silicon compounds, thermal analysis, thermoelectricity

PACS

85.85.+j

Micro- and nano-electromechanical systems (MEMS/NEMS) and devices
84.30.Ng

Oscillators, pulse generators, and function generators

ARTICLE DATA

Digital Object Identifier

http://dx.doi.org/10.1063/1.3305464

PUBLICATION DATA

ISSN

0021-8979 (print)

1089-7550 (online)

Publisher

$abstract.society.value is a Member of CrossRef

American Institute of Physics

For access to citing articles, you need to log in.

Figures (18) Tables (1)

Access to article objects (figures, tables, multimedia) requires a subscription; log in to view available files.
(Access to supplementary files, where available, is free for this journal.)